Owner's manual

XProtect® American Dynamics CC300 Keyboard Smart Client Plug-in
www.milestonesys.com Page 14 Default Settings
Default Settings
Default settings can be activated by pressing the “Default settings” button from the Setup Form.
The default setting including:
• COM Port: “COM1”.
• Baud: 9600, Parity: None, Data bits: 8, Stop Bits: 1, and Handshake: None
• Generic numbers:
o all not assigned
• AMERICAN DYNAMICS CC300 spec:
o ENTER - Select Generic number.
o Joystick - default joystick move motions such as pan left/right/stop, tile up/down/stop, and zoom
in/out
o F1 – Show live
o 1 + F1 – Show browse
o 2 + F1 – Show setup
o NEAR/FAR - Focus up/down/stop
o OPEN/CLOSE – Iris up/down/stop
o AUX1/2/3/4 – Ptz AUX1/2/3/4
o PRESET – Go to preset position
o STOP – Playback stop
o RECORD – Start recording on selected camera(Only XPE)
o PAUSE – Playback stop
o PLAY – Playback play
o REWIND – Reverse playback
o FASTFORWARD – Next sequence
o NEXT/LAST – Next image/Previous image
o MONITOR – Select monitor
o CAMERA – select camera