User Guide

6
3. Operation Guide
3.1 Button Mode
WS101 provides 3 kinds of pressing actions allowing users to define different alarms. Please refer to
chapter 5.1 for detailed message of every action.
Mode
Action
Mode 1
Short press the button (≤3 seconds).
Mode 2
Long press the button (>3 seconds).
Mode 3
Double press the button.
3.2 NFC Configuration
WS101 can be configured via NFC-enabled smartphone.
1. Pull out the battery insulating sheet to power on the device. The indicator will light up in green for 3
seconds when device turns on.
2. Download and install “Milesight ToolBox” App from Google Play or App Store.
3. Enable NFC on the smartphone and open Milesight ToolBox.
4. Attach the smartphone with NFC area to the device to read device information.
5. Basic information and settings of devices will be shown on ToolBox if it’s recognized
successfully. You can read and configure the device by tapping the Read/Write button on the
App. In order to protect the security of devices, password validation is required when configuring
via a new smartphone. Default password is 123456.
Note:
1) Ensure the location of smartphone NFC area and it’s recommended to take off phone case.