User Guide

4. Installation

3M Tapes Fix:

Paste 3M tape to the back of the button, then tear the other side and place it on a flat surface.

Screw Fix:

Remove the back cover of the button, screw the wall plugs into the wall and fix the cover with

screws on it, then install back the device.

Lanyard:

Pass the lanyard through the aperture near the edge of the button, then you can hang the button

onto keychains and the like.

5. Device Payload

All data are based on the following format(HEX):

Channel1

Type1

Data1

Channel2

Type2

Data2

Channel 3

...

1 Byte

N Bytes

1 Byte

M Bytes

1 Byte

...

For decoder examples you can find at https://github.com/Milesight-IoT/SensorDecoders.

5.1 Basic Information

WS101 reports basic information of button every time joining the network.