Quick Start Guide

www.milesight-iot.com www.milesight-iot.com
4. Power Supply
1. Fix the two mounting ears to both side of the device with screws.
2. Drill 4 holes on the ceiling or wall according to the mounting ear’s hole and fix the wall
plugs into the holes, then fix the device to the wall plugs with mounting screws. When
installing the device, it’s suggested to fix the two screws on the top at first.
Besides, this device can be mounted with the mounting stand via the threaded hole.
VS132 can be powered by 802.3at standard PoE or DC power adapter. Choose one of the
following methods to power up the device:
Make sure the detection part of sensor is facing straight down and in line with the
ceiling.
Avoid strong light, like direct sunlight or IR LED, in the detection area.
Do not install the sensor close to glass or mirror.
Whenthesensorismountedonthewall,ensurethedetectionpartofthesensoris
horizontallyclosetothelintelofthedoor.
Installation Notes
1 4
Installation Steps Top-Lintel Mount at Entrance
5
Ceiling Mount
Embedded Mount
Powered by DC Power Adapter