Industrial Router Lite Series UR32L Quick Start Guide 1
Safety Precautions Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide. The device must not be modified in any way. Do not place the device close to objects with naked flames. Do not place the device where the temperature is below/above the operating range. Do not power on the device or connect it to other electrical device when installing. Check lightning and water protection when used outdoors.
Revision History Date Doc Version Description Apr. 13, 2021 V 1.0 Initial version July 22, 2021 V 1.
Contents 1. Packing List...............................................................................................................................................................5 2. Hardware Introduction............................................................................................................................................ 5 2.1 Overview....................................................................................................................................................
1. Packing List Before you begin to install the UR32L router, please check the package contents to verify that you have received the items below. 1 × UR32L 1 × Magnetic Cellular 1 × Power Adapter 1 × DIN Rail Kit 1 × Quick Start Guide 1 × Stubby Cellular Antenna (Optional) Antenna 4 × Wall Mounting Kits 1 × Warranty Card If any of the above items is missing or damaged, please contact your sales representative. 2. Hardware Introduction 2.
2.2 Dimensions (mm) 2.
2.4 Reset Button Reset button is under the SIM slots. Function Reset Description SYSTEM LED Action Blinking Press and hold the reset button for more than 5 seconds. Static Green → Rapidly Blinking Release the button and wait. Off → Blinking The router is now reset to factory defaults. 2.5 Ethernet Port Indicator Indicator Link Indicator (Orange) Status Description On Connected Blinking Transmitting data Off Disconnected 3.
3.3 Router Installation The router can be placed on a desktop or mounted to a wall or a DIN rail. 3.3.1 Wall Mounting (Measured in mm) Use 4 pcs of M3 × 6 flat head Phillips screws to fix the router on the wall. Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m. 3.3.2 DIN Rail Mounting (Measured in mm) Use 2 pcs of M3 × 6 flat head Phillips screws to fix the mount clip to the router, and then hang the device to the DIN rail. The width of DIN rail is 3.5cm.
4. Log in the Web GUI of Router Please connect PC to LAN port of UR32L router. PC can obtain an IP address, or you can configure a static IP address manually. The following steps are based on Windows 10 operating system for your reference. IP Address: 192.168.1.1 Username: admin Password: password A. Go to “Control Panel” → “Network and Internet” → “Network and Sharing Center”, then click “Ethernet” (May have different names). B.
D. Enter the username, password, and click "Login". If you enter the username or password incorrectly more than 5 times, the login page will be locked for 10 minutes. E. When you login with the default username and password, you will be asked to modify the password. It’s suggested that you change the password for the sake of security. Click "Cancel" button if you want to modify it later. F. After you login the Web GUI, you can view system information and perform configuration on the router.
5. Network Configuration This chapter explains how to connect UR32L to network via WAN connection or cellular. 5.1 Ethernet WAN Configuration A. Go to “Network > Interface > Port” to change LAN1 to WAN port. B. Go to “Network > Interface > WAN” to select connection type and configure WAN parameters, click “Save & Apply” button to make the changes take effect. C. Connect WAN port to another network devices like modem. D. Go to “Network > Interface > Link Failover” to rise the WAN priority to 1. E.
5.2 Cellular Connection Configuration A. Go to “Network > Interface > Cellular > Cellular Setting” to configure APN, PIN code or other cellular info, click “Save” and “Apply” to save the configuration. B. Go to “Network > Interface > Link Failover” to enable SIM and rise link priority.
C. Click to configure ICMP ping detection information. D. Click “Status > Cellular” to view the status of the cellular connection. If it shows “Connected”, it means SIM has dialed up successfully. On the other hand, you can check the status of SIM indicator. If it keeps on green light statically, it means SIM has dialed up successfully. E. Open your preferred browser on PC, then type any available web address into address bar and see if it is able to visit Internet via UR32L router.
