User Manual

up successfully

ETH

Ethernet

Port Status

Off

Disconnected

Blue Light

Static: Connected

2.4 Reset Button

Function

Description

STATUS LED

Action

Reset

Static Blue

Press and hold the reset button for more than 5 seconds.

Static Blue →

Rapidly Blinking

Release the button and wait.

Off → Static Blue

The hotspot resets to factory default.

3. Hardware Installation

3.1 SIM Card Installation (Cellular Version Only)

A. Use a screwdriver to open the protective cover on the back panel of UG65.

B. Insert the SIM card into the device according to the direction icon on the device. If you need to take

out the SIM card, press into the SIM card and it will pop up automatically.

Note: Only when the PN on the device label includes “-LXXX” supports cellular.

3.2 Ethernet Cable & Power Cable Installation

A. Connect the Ethernet cable and power cable to corresponding interfaces.

B. Pass two cables through the waterproof silicone and slide into the grooves.

C. Screw the protective cover back to the device.