User Manual

24
D. Add the hotspot to the network server page. For more details about the network server configuration
please refer to network server guide or
Milesight IoT Support portal.
E. After connected, you can check connection status here.
9. Network Server Configuration
UG65 can work as network server and transmit data to Milesight IoT Cloud or other platform via
MQTT/HTTP/HTTPS.
9.1 Connect UG65 to Milesight IoT Cloud
A. Go to “Packet Forwarder” → “General” page to enable the embedded network server.
Note: when you enable and click “Save & Apply”, the Helium program will reboot and disconnect for
dozens of seconds.