User Manual

13
5. Network Connection
This section explains how to connect the hotspot to the network via WAN connection, Wi-Fi or cellular.
5.1 Configure the Ethernet Connection
A. Go to “Network” → “Interface” → “Port” page to select the connection type and configure Ethernet
port information, click “Save & Apply” for changes to take effect.
B. Connect Ethernet port of hotspot to network devices like router or modem.
C. Log in the web GUI via the newly assigned IP address and go to “Status” → “Network” to check
Ethernet port status.
5.2 Configure the Wi-Fi Connection
A. Go to “Network” → “Interface” → “WLAN” and select “Client” mode.
B. Click “Scan” to search for a Wi-Fi access point. Select the available one and click “Join Network”.
Note: please do use wired access method to access the web GUI of hotspot, or you will fail to configure
Wi-Fi setting.