User Manual

8
The external antenna should be installed vertically always on a site with a good signal.
3.3 Device Installation
UC300 device can be placed on a desktop or mounted to a wall or a DIN rail.
3.3.1 Wall Mounting
1. Fix the wall mounting bracket to the device with 2 screws.
2. Drill 4 holes on the wall according to the bracket, then fix the wall plugs into the wall.
3. Fix the device to the wall plugs with screws. When installation, it’s suggested to fix the two
screws on the top at first.
3.3.2 DIN Rail Mounting
1. Fix the mounting clip to the device with 3 screws.