User Manual

17
Password
The password used for connecting to MQTT broker.
TLS
Enable
Enable the TLS encryption in MQTT communication.
Protocol
It’s fixed as TLS v1.2.
CA File
Import the CA.crt file.
Client Certificate
Import the client certificate.
Client Key
Import the client key.
4.2.3 SMS Settings (Cellular Version Only)
UC300 cellular version supports SMS control and SMS report. Before that, ensure the device has
registered to cellular network and SMS Center Number is typed in “General -> Basic” settings.
About the SMS control commands and report contents, please refer to the
UC300 Cellular
Communication Protocol.
SMS Control
Parameters
Description
Enable
Enable to allow users to send SMS to control the device.
Control Center
Number
The number used to control this device. 2 control numbers can be added at
most.
Success
Confirmation
After control success, the device will send success reply to the control center
number.
Failure
Confirmation
After control failure, the device will send failure reply to control center number.