User Guide

6
4
NFC area
5
Back LED light strip
6
Wall mount hole
7
VESA 75*75mm
8
Type-C port
9
DC power jack
10
Ethernet port (PoE PD)
Note:
1) To use the back LED light strip, please remove the blackout tape.
2) DS7610 does not support inserting micro SD card since micro SD slot is inside the device,
please contact Milesight to preinstall the micro SD card before shipment.
3) There is a recovery button next to the type-C port, please do not press and hold it. If there is
any device problems, please contact Milesight technical support before using this button.
2.3 Dimensions(mm)
3. Power Supply
Milesight IoT Display DS7610 can be powered via a PoE injector, PoE switch, Type-C port or a DC
power adapter. Choose one of the following methods to power up the IoT Display.

Powered by a PoE injector
Connect the Ethernet cable of the IoT Display to the Data&Power port of the PoE injector. Plug
the power cable from PoE injector to a power outlet.