User Guide

2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
 The device must not be disassembled or remodeled in any way.
 Do not place the device outdoors where the temperature is below/above operating range.
Do not place the device close to objects with naked flames, heat source (oven or sunlight),
cold source, liquid and extreme temperature changes.
 The device must never be subjected to shocks or impacts.

Do not power off the device when it is upgrading or formatting, or it will cause operation
system error.
 Do not clean the device with detergents or solvents such as benzene or alcohol. To clean
the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry.
Declaration of Conformity
DS7610 is in conformity with the essential requirements and other relevant provisions of the CE
and FCC.
Copyright © 2011-2023 Milesight. All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Milesight IoT Co., Ltd.
For assistance, please contact
Milesight technical support:
Email:
[e-mail]
Support Portal: support.milesight-iot.com
Tel: [phone]
Fax: [phone]
Address: Building C09, Software Park III,
Xiamen 361024, China
Revision History
Date
Doc Version
Description
Nov. 30, 2022
V 1.0
Initial version