User Guide

NFC feature, then attach NFC devices to the NFC area of DS7610 to exchange the data. You can

use NFC to achieve Milesight LoRaWAN

nodes configurations, ID identifications, contactless

meeting check-in, etc.

4.2.6 USB

Plug the USB Type-C port of DS7610 to your USB devices. On Application page, go to Settings >

Connected devices > USB to select the USB usage as your requirement. USB can be used to

connect to computer, USB drive, USB microphone, etc.

Note:

1) The default USB mode of device is OTG. If you need to switch to Host mode, please refer to

developer API document.

2) If you need to enable debug mode, please go to Settings > About tablet to click Build number

7 times to enable the developer options, then go to Settings > System > Advanced > Developer

options to enable USB Debugging.