Owner`s manual

Overview
This appliance may ONLY be installed in an existing unaltered,
functioning solid-fuel burning fi replace with a working fl ue and
constructed of non-combustible material.
DO NOT install into combustible construction. This appliance
is NOT APPROVED for installation with a zero clearance kit.
739Jl or IR
fi replace
Chimney Terminal Cap
Flashing
Existing unaltered,
functioning solid-fuel
burning fi replace &
chimney
Outer trim
(optional, sold
separately)
Inner Front with
Barrier Screen
(required, sold
separately)
Fret
(optional, sold
separately)
2 x 3” approved
fl ex chimney liners
running full length
WARNING
HOT HEARTH / FLOOR! The
hearth or fl oor in front of the
fi replace may become very hot
when the fi replace heats. Do not use
the hearth as a seat or shelf. Solid
wood fl ooring in front of the fi replace
(if allowed) may shrink during the
heating season due to heat.
WARNING
Some materials or items, although
safe, may discolor, shrink, warp,
crack, peel, and so on because of
the heat produced by the fi replace.
Avoid placing candles, paintings,
photos, and other items sensitive to
heat around the fi replace.
WARNING
!
WARNING
!
QUALIFIED
INSTALLER
16