Product Manual

*Press Un-lock
•To
Cancel sector
isolation.
Alarm trigger
Sector
1. SHOCK sensor
2. PIR sensor
Trigger by car shocking
or objects in PIR field of
view.
Alarm will be triggered
again after cease 8
seconds.
• Siren alarm 30 seconds
• Lock function output 30
seconds.
• LED flash fast
De-active alarm
Press Un-lock
•Same response as
active disarm.
Triggered report and
isolation
*Press Un-lock
*Press unlock again
• Same response as
active disarm.
•LED flash and report
what sector has been
triggered by flash times.
(refer to table 1 )
• The period of time for
display is 30 seconds.
Program features
(Into selected function
mode)
*Press Un-lock
*Press Lock & Un-Lock
together for 5 seconds.
*Press Lock to select
function within 10
seconds (refer to
table2 ).
Note: Press 2 Lock into
function of
Shock sensor
sensitivity then press 1-7
times to set up sensitivity
level
*Press Un-Lock to
finalize setting or
waiting 10 seconds to
give up setting.
•Same response as
active disarm.
•Siren chirps 5 times.
•Siren chirp numbers as
function list(table 2).
•Siren chirps 5 times.
Smart Power up
*Alarm will continue
chirping if re-power up
in active arm or alarm
system.
*Into active disarm
when system in disarm
and re-power up.
•Same response as
trigger alarm.
•Same response as
active disarm.
Programming of
additional remotes
See instructions with
replacement remotes
TABLE 1
Triggered sector
The number of LED flash/beep
PIR
1
SHOCK sensor
2
PANIC
3
TABLE 2
The number of presses
Function List
Pre-setting
2
SHOCK sensor sensitivity 1~7 level
4 level
4
SHOCK alarm
ON
6
PIR
ON
8
Error chirp on/off
ON
10
Arm/Disarm chirp on/off
ON
12
Error sectors isolation
OFF
-4-
-5-