User's Guide

Chapter Two - 10
Operating Information
Shut Down & Force Shut Down
Shut down
Directly click (Shut down) from your OS to turn OFF the power of your computer. Before
shutting down, please remember to save any unfinished works and close the applications to
prevent your SSD from suffering possible data loss or damage. Shut down will turn OFF
power of your workstation. If you want to start your handheld again, you need to turn it ON
again by pressing the power button.
SW
Force Shut Down
In the event that your handheld computer hangs or stops responding, you can perform a
force shut down by pressing and holding the power button for 4~5 seconds. Please note that
any unsaved work or data will be lost this way.
Sleep & Hibernate
Sleep
Under mode, the system will temporarily save your work into the computer’s RAM. If
you want to start your computer again, please press the power button to resume. Under
Windows 10, please enter this mode directly by
Click (Start) → Click (Power) → Click (Sleep)
Move the cursor to the lower left or lower-left corner of the screen Click “Settings”
→ Click “Power” → Click “Sleep”.
Hibernate
Under mode, the system will save your work into SSD. If you want to start your computer
again, you need to press and hold the power button (approximately 2 seconds) until the SSD
indicator lights on. Under Windows 10, please enter this mode directly by
Click (Start) → Click (Power) → Click (Hibernate)
Move the cursor to the lower left or lower-left corner of the screen → Click “Settings”
→ Click “Power” → Click “Hibernate”.