Specifications

Regulatory Information
regs.htm[3/15/2022 8:15:16 AM]
Intel® Wireless Adapter Minimum required antenna-to-user separation distance
Intel® Centrino® Wireless-N + WiMAX 6150 18 mm
Intel® Centrino® Wireless-N + WiMAX 6350 17 mm
Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or Plug-In Transmitters
Based upon FCC Knowledge Database publication number 616217 when there are multiple transmitting devices installed in a host
device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements.
OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas
installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and
portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details
in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system
incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID:
XXXXXXXX", FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the
user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables
and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification,
substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for
any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
China:
模块通
过
型号核准并不代表嵌入或使用
该
模块的最
终设
备符合相
关
无
线电
管理技
术规
定或
标
准 最
终设
备厂商
须对产
品的技
术
特性是否
符合无
线电
管理技
术规
定或
标
准
负责
Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b,
802.11g and 802.11n products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices
may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in
specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products,
you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that
they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible
power and frequency settings for the country of use is an infringement of national law and may be punished as such.
Intel WiFi Adapters - 802.11n, 802.11ac and 802.11ax Compliant
The information in this section applies to the following products:
Intel® Centrino® Wireless-N 100
Intel® Centrino® Wireless-N 105
Intel® Centrino® Wireless-N 130
Intel® Centrino® Wireless-N 135
Intel® Centrino® Wireless-N 1000
Intel® Centrino® Wireless-N 1030
Intel® Centrino® Wireless-N 2200
Intel® Centrino® Wireless-N 2230