Specifications

Regulatory Information
regs.htm[3/15/2022 8:15:16 AM]
Type (Main/Aux) Gain in dBi* Gain in dBi* Gain in dBi* Gain in dBi*
PIFA Main
Aux 3.24 3.73 4.77 4.77
MIMO
*All antenna gains include cable loss.
Antenna
Type
Antenna Location
(Main/Aux)
6.2GHz Peak
Gain in dBi*
6.5GHz Peak Gain
in dBi*
6.6GHz Peak Gain
in dBi*
7GHz Peak Gain
in dBi*
PIFA Main
Aux 4.83 4.30 5.37 5.59
MIMO
*All antenna gains include cable loss.
Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or Plug-In Transmitters
Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices installed in a host
device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements.
OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas
installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and
portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details
in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.
Antenna Placement Within the Host Platform
To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in notebook or tablet PC
host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform,
with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the
antenna when installed in the host system.
Any separation distances less than those shown will require additional evaluation and FCC authorization.
For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting antennas be
provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and Bluetooth transmission. For less
than 5 cm separation the separation ratio must be verified according to FCC publication KDB 447498 for the specific adapter.
Wireless Adapter Minimum required antenna-to-user separation distance
Intel® Centrino® Wireless-N 100 9 mm
Intel® Centrino® Wireless-N 105 9 mm
Intel® Centrino® Wireless-N 130 8 mm
Intel® Centrino® Wireless-N 135 9 mm
Intel® Centrino® Wireless-N 1000* 20 mm
Intel® Centrino® Wireless-N 1030 8 mm
Intel® Centrino® Wireless-N 2200 9 mm
Intel® Centrino® Wireless-N 2230 6 mm
Intel® Centrino® Advanced-N 6200* 20 mm
Intel® Centrino® Advanced-N 6205 12 mm
Intel® Centrino® Advanced-N 6230 12 mm
Intel® Centrino® Advanced-N 6235 8 mm
Intel® Centrino® Ultimate-N 6300 13 mm
Intel® Dual Band Wireless-AC 7260 8 mm