User`s manual

distance in full duplex operation. The quality of the fiber

supported.

connectors used, will have a direct impact on the distance

cable used, as well as the quality and number of splices and

You can connect two devices over a 60- kilometer

connect two devices over a 2-kilometer distance. Fiber

does not exceed 100 meters (328 feet).

Also be sure that the length of any twisted-pair connection

connections or Category 5 cable for 100Mbps connections.

45 connections: Category 3, 4 or 5 cable for 10Mbps

shield/screened unshielded twisted-pair (S-UTP) cable for RJ-

RJ-45 ports: Use unshielded twisted-pair (UTP) or

n Cabling

B. 100Base-FX fiber port: Fiber multi-mode connector type

must use 62.5/125 um multi-mode fiber cable. You can

single-mode connector type must use 9/125 um single- mode

fiber cable.