User`s manual

crossover cable.
assignment has been designed to contain crossover pinout. That
could also have connected back to a centralized switching
two small workgroups via fiber cable. The two MIL-S501xx units
users to access the server's data.
with each other. Connecting servers to the Switch allow other
location as well. All the devices in this network can communicate
60Km with single-mode fiber.
13
Collapsed Backbone Application
You can use Uplink port of the MIL-S501xx to connect with
another hub or switch to interconnect each of your small-switched
workgroups to form a larger switched network. You can also use
fiber ports to connect switches. The distance between two
switches via fiber cable can be up to 2Km with multi-mode fiber or
The Up-link Port is the same port as port 1, but the pin
is to say, you can connect this port to hub or switch without
Figure 3-2. Collapsed Backbone Application
In the above illustration, two MIL-S501xx are used to interconnect