User`s manual

DIP 1
UP: Fiber port operates on Full Duplex mode.
an AC outlet. The Adapter supplies 9VDC at 700mA to the
11
n RJ-45 Ports: Five 10/100 N-Way auto-sensing for 10Base-T
or 100Baes-TX connections.
n 100Base-FX Fiber Port: There are 5 types of fiber
connectors available for the MIL-S501xx as shown above.
The distance for fiber cabling can be extended up to 2
kilometers for multi-mode fiber and up to 70 kilometers for
single-mode fiber.
n DIPswitch: the DIPswitch is to select Full duplex or Hall-
duplex mode for the fiber port.
n DC Power Connector: Plug DC Power Adapter’s female end
into this device, and the male end of DC Power Adapter into
Switch.
Down: Fiber port operates on Half Duplex mode.