Owners Manual

SPECIFICATIONS
Input Impedance. . . . . . . 100k-Ohm Unbalanced
Max Input Level . . . . . . . +19dBV
Input Connectors . . . . . . Stereo ¼” TRS Phone Jack
Outputs . . . . . . . . . . . . Four Stereo ¼” TRS Phone Jacks
. . . . . . . . . . . . . . . . . . One 3.5mm Jack
Output Impedance . . . . . 100 Ohm each output
Max Gain . . . . . . . . . . . . 20dB/Channel
S/N Ratio . . . . . . . . . . . . >90dB
THD . . . . . . . . . . . . . . . <0.005%
IMD (SMPTE) . . . . . . . . . <0.005%
Power Supply . . . . . . . . . 18V DC
Dimensions . . . . . . . . . . 144 W x 102 D x 38 H mm
Weight . . . . . . . . . . . . . 0.297 KG
348B Valeria Street
Nashville, TN USA
615 250 2434
www.miktekaudio.com
TYPICAL SET-UP WITH HM4 - Continued
NOTE 1: Make sure the GAIN knob is turned all the way down
before connecting headphones. Use caution and care for your
ears by always starting with low headphone levels and then
slowly raise the signal to a comfortable listening volume.
NOTE 2: If monitoring a mono input, engage the mono switch to
ensure the headphones will receive signal on both left and right
channels.