Owners Manual

SPECIFICATIONS
Frequency Response . . . . . . 10Hz to 93kHz
Noise Level . . . . . . . . . . . . -100 dBu
THD+N . . . . . . . . . . . . . . . <0.04%
Input Impedance. . . . . . . . . >10k Ohm
Output Impedance . . . . . . . 100 Ohm
Stereo Input. . . . . . . . . . . . ¼” Phone Jack, Unbalanced
Mix Thru . . . . . . . . . . . . . . ¼” Phone Jack, Unbalanced
Mic In . . . . . . . . . . . . . . . . XLR Connector, Balanced
Mic Thru . . . . . . . . . . . . . . XLR Connector, Balanced
Max Input Level . . . . . . . . . +20dBu
Power Supply . . . . . . . . . . . 18V DC
Dimensions . . . . . . . . . . . . 144 W x 102 D x 28 H mm
Weight . . . . . . . . . . . . . . . x KG
348B Valeria Street
Nashville, TN USA
615 250 2434
www.miktekaudio.com
TYPICAL SET-UP WITH HM2 - Continued
Note: Make sure the GAIN knob is turned all the way down be-
fore connecting headphones. Use caution and care for your ears
by always starting with low headphone levels and then slowly
raise the signal to a comfortable listening volume.