Owner's Manual

WSTHD-800-01-DS Radio temperature and humidity sensor
DESCRIPTION:
A radio temperature and humidity sensor is a
measurement module, the reading of which is possible
through a radio connection. Its use is recommended in
places where creating a wired installation is difficult or
inadvisable. The sensor enables a continuous registration
of temperature and humidity up to 136 hours
with a frequency of registration every 1 minute. The
sensor's registration can be read by a radio recording unit
connected to a computer with LOGGISOFT software
installed. Built-in LCD display facilitates operating the
device and enables local visualization of the
measurements.
Sensor dimensions WSTHD-800-01-DS:
*Sond na przewodzie o długości 2,5m
www.mikster.com.pl MIKSTER Sp. z o.o. 41-250 Czeladź, ul. Wojkowicka 21, tel. [phone] fax: [phone] email: [e-mail]
Technical data
Measuring range of the probe
temperature
-40
o
C..85
o
C
Accuracy of the probe
measurement for the temperature
range
±0,5
o
C (-20°C .. +85°C)
±2
o
C (-40°C .. -20°C)
Measurement resolution
temperature
0,1
o
C
Probe measuring range
humidity
0..100% (-30
o
C..85
o
C)
Accuracy of humidity measurement
±3% RH (in the range 15..85%)
±3..5% RH (in the remaining range)
Resolution of humidity
measurement
1,0%
Power
Lithium battery 3.6V
Battery life
Not less than 2 years
Operating conditions for the
housing sensor
-30°C .. +85°C
Humidity: 0..75%
Storage conditions
Temperature: -30
o
C..85
o
C
Humidity: 0..75%
Electromagnetic compatibility
(EMC)
Immunity acc. to
PN-EN61000-6-2
Data transmission
Operating frequency 868.4 MHz
Internal measuring buffer
136 hours (recording every 1 minute)
Installation data
External dimensions
Housing: 82x80x60mm (W/HD) with
antenna and temperature sensor
82x234x60mm
Weight
210g
Dimensions of temperature and
humidity probe
Długość 48mm, średnica ø19,5mm
Length 48mm, diameter ø19.5mm
Length 75mm*, diameter ø19.5mm
Mounting
4 holes ø4,2mm spacing 70mm
height 50mm
Degree of protection, housing
IP65, polycarbonate