Owner's Manual

Technical data
Power
3.6 v AA 2.6 AA replaceable lithium
battery
Antenna
permanently mounted external one,
height 90 mm
Registration:
4,608 samples/channel
Display:
LCD 4 digits dedicated
Temperature measuring range:
-30 ℃ ÷ 70 ℃
Temperature measurement error:
≤±0.3 ℃ in the range of 0 ℃ to 25 ℃
≤±0.5 ℃ in other ranges
Temperature measuring
resolution:
0,1℃
Humidity measuring range:
0%RH to 100% RH
Humidity measuring error:
≤ ±3% RH w zakresie 0% ÷ 80%RH
≤ ±5% RH w zakresie 80% ÷ 100%RH
Humidity measuring resolution:
1% RH
Communication:
868.4 MHz radio
Measuring element:
internal digital sensor
option to connect a dedicated, external
temperature or temperature and
humidity probe (sold separately)
Measurement channels:
two internal (temperature and
humidity) Expandable by a further 2
using an external probe
Operating conditions:
temperature: –30°C to 70 °C
humidity: 0% RH to 99% RH (no
condensation)
Installation data
External dimensions
71 x 71 x 27 mm (w x h x d)
without antenna
Weight
80 g (net)
Fixing
You can hang it or put in on the ground
Degree of protection
IP 20
NTHD-01 PHARM Radio temperature and humidity sensor
DESCRIPTION:
NTHD-01 PHARM sensor enables continuous recording of
temperature for up to 136 hours with a recording frequency
every 1 minute. The sensor’s registration can be read
via the NRU-20 PHARM+ radio logger connected
to a computer with installed software
Loggisoft” software. The built-in LCD display makes the device
easy to operate device and enables local 1isualization of the
measurements. Its use to recommended in places where
installation is difficult or inadvisable, and there are no difficult
environmental conditions (high humidity/dust) e.g. in
pharmacies, clinics, hospitals.
Connecting an additional probe:
Dimensions:
v1.1
www.mikster.com.pl MIKSTER Sp. z o.o. 41-250 Czeladź, ul. Wojkowicka 21, tel. [phone] fax: [phone] email: [e-mail]