Specifications

Technical Data MC132x Users Manual Rev. 0.22
9.3 Connector pinning
9.3.1 Gigabit Ethernet Connector
9.3.2 Circular power connector, 12-pin
pin signal pin signal
1 GND 7
2 VCC 8
3 STROBE_GND 9
4 STROBE 10
5 TRIG_GND 11 VCC
6 TRIG 12 GND
Table 9.3-1
Manufacturer: Hirose
Order no.: HR10A-10R-12P
*
Before applying power to the camera we strongly recommend to verify the used pins of the
power connector, the polarity (+/-) of the leads and the supply voltage.
The camera may only be used with a supply voltage according to the camera specification.
Connecting a lower or higher supply voltage, AC voltage, reversal polarity or using wrong
pins of the power connector may damage the camera. If doing so, the warranty will expire
immediately.
38