User's Manual

22
Enable/Disable Radio
Enable or disable the RF Signal.
Manual LEAP Login
Log in to LEAP manually, if LEAP is set to manually
prompt for user name and password on each login.
Reauthenticate
Reauthenticate to the access point.
Select Profile
Click a configuration profile name to switch to it. If no
configuration profile exists for a connection, add a
profile first.
Show Connection Status
Display the Connection Status window. This window
displays information about the connection:
Active Profile
Displays the name of the active
configuration profile.
Auto Profile
Selection
Shows whether auto profile
selection is enabled.
Connection
Status
Displays whether the adapter is
connected to a wireless network.
Link Quality
Lists the quality of the link
connection.
SSID
Displays the SSID of the
associated network.
Access Point
Name
Shows the name of the access
point the wireless adapter is
connected to.
Access Point IP
Address
Shows the IP address of the access
point the wireless adapter is
connected to.
Current Receive
Rate
Shows the current receive rate in
Mbps.
Current Transmit
Rate
Shows the current transmit rate in
Mbps.
Client Adapter IP
Address
Displays the IP address of the
wireless adapter.
Exit
Exit the Atheros Client Utility application.