Quick Guide

UP1302C-12
UP1302C-12 internal power supply for CCR1036
series.
Usage
UP1302C-12 act as a replacement power unit for
the following devices, only r2 revisions:
CCR1036-12G-4S
CCR1036-12G-4S-EM
CCR1036-8G-2S+
CCR1036-8G-2S+EM
Specifications
Open frame PSU 12 V DC 10.8 A 130 W, 90-264 Vac 90 % 55x106x34 mm.⎓
Installing
Each of the units comes in ESD protective packaging. Installing should be done by a qualified person, please follow
safety precautions when handling electrical equipment:
1. Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical
discharge (ESD) damage;
2. Remove the top cover from the CCR1036 device to access the power supply unit;
3. Unplug wires from the supply unit leading to PCB;
4. Unscrew four screws and remove the old unit;
5. Place UP1302C-12 into the CCR and secure it with previously removed screws;
6. Attach supply cable to the white connector;
7. Install to cover into its original position and secure with screws.
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only.
For more information about this product visit our web page: https://mikrotik.com/product/UP1302C-12
See mikrotik.com/products for the latest version of this document. Page 1, Document #52942 Modified on: 30.OCT.2019