User Manual

2.
3.
1.
2.
3.
External SMA antenna connector already connected to the LR card.
Automotive connector. Pinout: A - reserved for future use (orange), B - reserved for future use (blue), C - ground (black), D – power in (red).
MiniPCIe slot with an integrated LR2 card.
Integrated Wireless module operating at 2.4 GHz, 802.11b/g/n protocol.
Mini-SIM Slot.
Powering
The device accepts power in the following ways:
Ethernet port accepts passive PoE 9-30 V DC .
Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 9-30 V DC.
Automotive connector 9-30 V DC.
The power consumption under maximum load can reach 8 W.
Connecting to a PoE Adapter:
Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Mounting
The device can be mounted in several ways: pole, wall, ceiling or it can be placed in a specially designed Mikrotik holder which comes with the package.
The package also includes a drill hole template with detailed mounting instructions, to help you with the Ethernet cable installation and attachment to a
ceiling or a wall. Steel bracket to put on the other side of a dropdown ceiling tile and two screws and wall anchors. Zip ties or steel clamps for mounting on
the pole.
The IP rating scale for this device is IP54. When mounting outdoors, please ensure that any cable openings are directed downwards. We
recommend using the POE injector and proper grounding with a Cat6 shielded cable. When using and installing this device please pay attention
to the Maximum Permissible Exposure (MPE) safety distance with a minimum of 20 cm between the radiator and your body.