User Manual

1.
2.
wAP LR2 kit
wAP LR2 kit
The wAP is a small weatherproof device with an integrated LR2 card.
Quickstart
Make sure your ISP is allowing hardware change and will issue an automatic IP address.
Open the bottom lid (see " ").Bottom Lid
Connect an external antenna to the SMA connector (see " ").Antenna usage
Connect the device to the power source (see " ").Powering
Connect with your device to the MikroTik wireless network
The configuration has to be done through the wireless network using a web browser or mobile app - (see " "). Alternatively, MikroTik mobile app
you can use the WinBox configuration tool . By default, Ethernet port access is blocked by a firewall.https://mt.lv/winbox
Once connected to the wireless network, open in your web browser to start the configuration.https://192.168.88.1
user name: a and there is no password by default. dmin
When using a mobile application choose Quick setup and it will guide you through all necessary configurations in six easy steps.
Find your LR Gateway ID on the label within the product and register it in your Network Server.
To make the device connect to the LR Network Server, please see " ".Configuration
Click the "Check for updates" button and update your RouterOS software to the latest version, the device needs to have an active Internet
connection.
After the update set your country, to apply country regulation settings.
Set your WiFi password.
Set the router password.
Expansion slots and ports
10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for
connecting to other network devices.