User Manual

LED indicators
The power LED indicates that the unit is receiving power in the ETH1 port.
LTE LED indicates that the device is currently connected to a cellular tower.
LTE Signal LEDs display the strength of the cellular signal.
PoE LED indicates that the ETH2 port is currently powering another device with PoE.
Reset button
The routerBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over
the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Mode button
The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS script. You can also disable this button.
The mode button can be configured in RouterOS menu /system routerboard mode-button.
Accessories
Package includes the following accessories that come with the device:
Specifications
For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/sxt_r
Operating system support
The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
SIM slot usage