User Manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
SXT R
The SXT R comes without modem, it has built-in LTE antenna, two 10/100 Ethernet connectors which support MDI-X auto-detection. There are two micro
SIM card slots available, to switch between cell providers.
First use
Open the bottom lid.
Install the desired card into miniPCIe slot, please refer to paragraph .miniPCIe slot usage
Insert the micro-SIM cards into the micro-SIM slots (SIM A slot is a default).
Connect the device to the power source (see " ").SXT kit-series#Powering
Once the device is powered on and PC connected to the device, open in your web browser or Winbox to start the https://192.168.88.1 
configuration.
User name: a and there is no password by default you will be logged in automatically to the Quick Set screen. dmin 
We recommend clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the
best performance and stability. Must have an internet connection and a valid SIM card.
To manually update the device, please go to our web page and download the latest (MIPSBE) software packages to your PC.
Open Web browser or Winbox and upload packages to the Files menu and reboot the device.
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next
time.
Click on the "Apply Configuration" to save changes.
Expansion slots and ports
Two 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for
connecting to other network devices.
MiniPCIe slot and two SIM slots (can't be used separately) to be used with a 3G/4G/LTE modems.
The Mode button allows you to run any script when the button is pushed.
Powering
The device accepts 18-57 V DC passive and 802.3af/at PoE power from the Ethernet port ETH1. The package contains a 24 V adapter and a passive PoE
injector. Power consumption without attachments up to 6 W.
Connecting to a POE Adapter:
Connect the Ethernet cable from the device to the POE port of the POE adapter.
Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Configuration