Quick Guide

Reset button
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers
(required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Mode button
The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS
script. You can also disable this button. The mode button can be configured in RouterOS menu /system routerboard
mode-button.
Accessories
Package includes following accessories that comes with the device:
• DC ⎓ EU/US Switching Power Supply 24 V, 0.8 A, 19.2 W, 85.3%, VI, cable:150 cm Hor CMC.
• Hose Clamp SUS304 (Philips type ; clamping diameter range 35-70 mm).
• POE Injector with shielded connector.
• SXT5D mounting
• Elastic thermal pad, 25x40x3,2 mm (ziplock bag).
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/sxt_r
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019