Brochure

MQS

If you work with many PoE powered devices and manage their conﬁguration and diagnostics, this small

device ﬁts in your pocket will make your life so much easier! The MQS is a tool that lets you manage

MikroTik and other devices (including Ethernet-only!) from your smartphone over a Wi-Fi connection!

MQS can be powered from a power bank or a USB charger. It has PoE

out to power your devices – you don’t even need electricity

on-site to perform maintenance, diagnostics or Netinstall!

No more climbing and balancing towers with unwieldy laptops – just

carry an MQS in your pocket for safe and simple work anywhere!

Unplug the PoE cable from your CPE device, attach the MQS and it will

allow you to connect wirelessly and apply basic settings, working as a

Wi-Fi to Ethernet bridge with PoE output.

• Portable assistant for CPE install, bandwidth test

and conﬁguration

• Power it with a USB power bank and it will power

your CPE over PoE, while you conﬁgure it

• Can also be used as a temporary travel AP

Mobile Quick Setup - system administrator’s best friend

PAGE 1
MQS MQS Mobile Quick Setup - system administrator’s best friend If you work with many PoE powered devices and manage their configuration and diagnostics, this small device fits in your pocket will make your life so much easier! The MQS is a tool that lets you manage MikroTik and other devices (including Ethernet-only!) from your smartphone over a Wi-Fi connection! • Portable assistant for CPE install, bandwidth test and configuration • Power it with a USB power bank and it will power your CPE over PoE
PAGE 2
MQS MQS 1 2 3 4 2
PAGE 3
MQS Specifications Product code RBMQS CPU ESP32, 160 MHz Storage 2 MB flash 10/100M Ethernet ports 1 Wireless 2.4 GHz 802.11b/g/n Antenna gain 1.5 dBi Powering options MicroUSB 5 V (recommended power bank output >2.1 A), PoE PoE in Passive PoE, 5 - 30 V PoE out Passive PoE, 12 V 400 mA (when USB 5 V input is used) Dimensions 40 x 65 x 21 mm Operating temperature -20°C ..