User Manual

1.
2.
3.
Guide hose clamp through the opening on the back of the device.
Attach to the pole or mast.
Align and secure by hose clamp screw using PH2 screwdriver.
The device should be placed by the antenna facing upwards.
You should avoid connecting a loose Ethernet cable to the Ethernet port, secure the cable to a wall or the pole, so that the cable weight is not pulling the
port. It is recommended to secure the Ethernet cable less than 2m from the device. This is to ensure that the cable doesn't damage the port by its weight or
doesn't fall out.
When mounting, please ensure that cable feed is pointing downwards.
The IP rating scale of this device is IP54. We recommend using Cat6 shielded cables.
Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of
this equipment in the residential environment could cause radio interference.