User Manual

mAP lite
mAP lite
Quick Setup Guide
The mAP is a small wireless access point with one ethernet port, the ethernet port supports powering by PoE. Depending on software configuration, it can
function as a wireless client, an access point or a repeater.
First use
Connect the device to the included power adapter;
Connect your computer to the wireless network;
Open in your web browser to start the configuration;192.168.88.1
User name: and there is no password by default; admin
Powering
The device accepts power from the USB port or from the Ethernet port.
Micro USB power jack accepts 5 V DC, a USB 5 V adapter is included with the product.
The Ethernet port accepts passive Power over Ethernet 11-57 V DC.
The Ethernet port also accepts PoE power from an 802.3af switch over the pins +4,5/-7,8 or +3,6/-1,2.
Under maximum load, the power consumption of this device is 4 W.
Booting process
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: https://mt.lv/help
In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN side https://mt.lv/winbox
(all access is blocked from the internet port by default).
For recovery purposes, it is possible to boot the device from the network, see section Buttons and jumpers
Extension Slots and Ports
One 10/100 Ethernet port, supporting automatic cross/straight cable connection (Auto MDI/X), so you can use either straight or cross-over cables
for connecting to other network devices.
One Integrated Wireless 2.4GHz 802.11b/g/n 2x2 MIMO, Onboard PIF antennas, max gain 2dBi.
One microUSB 2.0 port for powering only.
Buttons and jumpers
RouterBOOT reset button has the following functions: