User Manual

ManualsBrandsMikroTik ManualsComputers & AccessoriesLHG LTE6 kit

Table Of Contents

LHG kit-series

1. 
2. 
3. 
4. 
5. 
6. 
7. 
8. 
9. 
10. 
11. 
12. 
13.  
LHG kit-series
This manual is for LHG kit series models:
LHG LTE6 kit
LHG 4G kit
LHG LTE kit
LHG LTE kit-US
Quickstart
The default configuration CPE RouterMode:
*WAN port is protected by a firewall and enabled DHCP client.
LAN Configuration:
IP address 192.168.88.1/24 is set on ether1 (LAN port);
DHCP Server enabled;
DNS Enabled;
WAN (gateway) Configuration:
Gateway: lte1;
ip4 firewall: enabled;
NAT: enabled.
While holding the unit by its central column, apply force to the tab, which holds the latch closed, until the latch pops open.
Insert the SIM card into the slot, with chips facing UP.
Assemble case by attaching legs to the base of the unit, please see   paragraph.Case assembly
Mount unit in your desired place, please see   paragraph.LHG kit-series#Mounting
Connect an Ethernet cable to the Ethernet port, connect the other end of the Ethernet cable to the included PoE injector.
Plug the PoE injector into your PC.
Plug the included power supply into the PoE injector to start up the device. please see the  paragraph.powering
Set LAN computer IP configuration to   (DHCP).
automatic
Open   in your web browser to start the configuration.https://192.168.88.1
User name: a  and there is no password by default you will be logged in automatically to the Quick Set screen.
dmin
Update the device by clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to 
ensure the best performance and stability. Must have a valid SIM card inserted.
To manually update the device, please gohttps://mikrotik.com/download

Summary of content (11 pages)

PAGE 1
LHG kit-series This manual is for LHG kit series models: LHG LTE6 kit LHG 4G kit LHG LTE kit LHG LTE kit-US Quickstart The default configuration CPE RouterMode: *WAN port is protected by a firewall and enabled DHCP client. LAN Configuration: IP address 192.168.88.1/24 is set on ether1 (LAN port); DHCP Server enabled; DNS Enabled; WAN (gateway) Configuration: Gateway: lte1; ip4 firewall: enabled; NAT: enabled. 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 2
13. 14. 15. 16. Choose MIPSBE packages for this device and download it to your PC. Upload downloaded packages to the WebFig "Files" menu and reboot the device. Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates. Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time. 17. Click on the "Apply Configuration" to save changes. Case assembly 1.
PAGE 3
Optional - to access the miniPCIe slot, the opening of the unit top cover is required. As an opening tool, you can use a large size flat head screwdriver or a small coin. Be extremely cautious when opening, because the incorrect opening of the clip can break it off! Mounting and configuration of this device should be done by a qualified person. Follow these steps: Additional Caution when lifting up the cover, do not force it with sharp objects.
PAGE 4
. Locate the miniPCIe slot on the PCB and remove two factory attached screws; 5. 6. 7. 8. 9. 10.
PAGE 5
1. 2. 3. 4. 5. 6. Slide the included metallic mounting rings into the two slots on the back of the antenna dish. Attach the unit to a pole, with the Ethernet port pointing downward. Use a PH2 screwdriver to tighten the rings. Fix the Ethernet cable to the pole using zip ties, less than one meter from the unit, to avoid the cable being pulled out of the port. Check mounting angle and positioning.
PAGE 6
Expansion slots and ports One 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices. The Ethernet port accepts 9-30 V DC powering from a passive PoE injector. MiniPCIe slot and SIM slot (can't be used separately) to be used with a 3G/4G/LTE modem.
PAGE 7
Operating system support The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. Safety Notice Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A device, operating it near residential radio equipment could cause radio interference.
PAGE 8
IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 120 cm between the radiator and any part of your body. Cet equipement est conforme aux limites d'exposition au rayonnement IC definies pour un environnement non controle.
PAGE 9
Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products HU Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: https://mikrotik.
PAGE 10
SV Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products MPE statement This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
PAGE 11
s://mt.lv/help-no+ LT. Naudojimosi instrukcija: Prijunkite maitinimo adapterį įjunkite įrenginį. Į interneto naršyklę 192.168.88.1 Atidarykite galite konfigūruoti gaminį. Daugiau informacijos rasite {+}https://mt.lv/help-lt+ LV. Lietošanas instrukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu. Plašāka informācija {+}https://mt.lv/help-lv+ MT. Manwal tal-istruzzjoni: Qabbad l-adapter tal-qawwa biex iddawwar it-tagħmir. Iftaħ 192.