User Manual

Reset button
The reset button has three functions:
Hold this button during boot time until the LED light starts flashing, release the button to reset the RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds).
Or keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
The package includes the following accessories that come with the device:
Mounting set for LHG-5.
POE Injector/Gigabit POE injector(For LHGG-5acD).
LHG-5G-390 mm Dish 3,0x2.5x0,5 mm.
DC EU/US Switching Power Supply 24 V, 0.38 A, 9 W, Level VI, cable:1.5 m).
Hose Clamp SUS304 (philips type ; clamping diameter range 35-70 mm).
Specifications
For more information about LHG products, specifications and pictures please visit our web page: https://mikrotik.com/product/lhg_2
https://mikrotik.com/product/RBLHG-5nD
https://mikrotik.com/product/RBLHG-5HPnD
https://mikrotik.com/product/lhg_5_ac
Operating system support
The device supports RouterOS software version 6.48.3 The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Federal Communication Commission Interference Statement
FCC ID: LHG 2 - TV7LHG2ND
LHG 5 - TV7LHG5NDM
LHG 5 ac - TV7LHG5ACD
LHG HP5 - TV7LHG5HPND
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are