User Manual

PowerBox Pro
PowerBox Pro
The PowerBox is an outdoor device with five Gigabit Ethernet ports that supporting PoE power output to ports 2-5 (1 A maximum per port, 2 A total
maximum).
First use
Connect your WAN cable to port 1, and the other devices to ports 2-5.
Set client device IP configuration to automatic (DHCP).
The default IP address from ports 2-5 (LAN) is 192.168.88.1.
The username is admin, there is no password.
Use the WinBox configuration tool if the IP address is not available and connect through MAC Address.
Powering
The power consumption of this device without attachments is 6 W, Max power consumption is 54 W. The device accepts power from the power jack or
from the first Ethernet port (Passive PoE):
Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC.
The ether1 port accepts Passive PoE input 12-57 V DC.
Mounting
It is possible to attach the device to a DIN rail, using provided DIN rail bracket and screws. Since the device has a weatherproof outdoor case, you can
mount it on a pole, with provided two zip ties or a steel clamp. The ground cable needs to be attached to a specially designed screw on the backside of the
unit.