User Manual
Table Of Contents
hAP mini
hAP mini RB931-2nD
The hAPis a simple home wireless access point. It is already configured, you can simply plug in your ISP cable and start using wireless internet. We
recommend you set up a password to secure your device.
Setup
Choose your powering solution, please see the section for possibilities.hAP mini#Powering
Connect your internet cable to the first port, and, if you have wired devices, connect them to the other ports
Set your computer IP configuration to automatic (DHCP).
From your PC or smartphone, connect to the wireless network name which starts with "MikroTik".
Once connected to the wireless network, open in your web browser to start configuration, user name: a and there is no https://192.168.88.1
dmin
password by default.
When using a mobile application choose Quick setup and it will guide you through all necessary configuration in six easy steps.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings and set up your password on the screen that loads.
Powering
The device accepts powering from the microUSB port. The port itself doesn't function as a standard microUSB port for data, it is only used for power. You
can use any standard 0.5 - 2A USB adapter that usually comes with smartphones. One 5V 0.7A USB charger is included in the box.
The power consumption under maximum load can reach 3.5W.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.