User Manual

GPS
NB/CAT-M
Attach your antennas to the SMA connectors:
Buttons and jumpers
Reset button
Hold this button during boot time until the LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
U.FL to SMA pigtail and the external Bluetooth antenna are not provided with the package.
BG77 supports NB and GNSS. Both cannot be used together simultaneously. Please check the guide at - WWAN and GNSS priority
. automatization
External antennas must be connected to use the Narrow Band modem and GPS. Not provided with the package.