AWS Getting Started Guide

© 2021, Amazon Web Services, Inc. or its affiliates. All rights reserved.
You can debug NB-IoT/Narrowband connection following the guide:
https://help.mikrotik.com/docs/display/UM/BG77+modem+AT+commands
Community presentation on RouterOS debugging:
https://mum.mikrotik.com/presentations/LB16/presentation_3546_1466414640.pdf
and:
https://mum.mikrotik.com/presentations/LK17/presentation_4374_1497252077.pdf
page 35.
4.3 Other pre-requisites
Not required.
4.4 Additional Software References
MikroTik forum:
https://forum.mikrotik.com/
5 Set up your hardware
KNOT manual (hardware setup guide) can be found at:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=41680915
KNOT quick-guide can be found at:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=40992896
MQTT publish to AWS guide:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=63045633
The device pictures are available over at:
https://mikrotik.com/product/knot#fndtn-gallery
RouterOS firmware versions can be found at:
https://mikrotik.com/download
KNOT uses MIPSBE architecture.
RouterOS upgrade guide can be found at:
https://help.mikrotik.com/docs/display/ROS/Upgrading+and+installation
RouterOS documentation can be found at:
https://help.mikrotik.com/docs/display/ROS/RouterOS
Connecting: