AWS Getting Started Guide

© 2021, Amazon Web Services, Inc. or its affiliates. All rights reserved.
1.3 Revision History (Version, Date, Description of change)
1.0 14-Jan-2022 Initial Version
2 Overview
KNOT or RB924i-2nD-BT5&BG77.
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device
with exceptional connectivity options and protocol support. It is an IoT Gateway that uses
Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular
connection, it is supported by countless mobile operators around the globe.
KNOT can monitor onboard GPIOs, convert Modbus protocol to TCP, and even forward
Bluetooth packets to TCP/IP network via HTTPS and MQTT.
It could be used as a backup connection for the Ethernet or as a management channel for your
network. NB/CAT-M monthly plan is much cheaper than LTE.
3 Hardware Description
3.1 DataSheet
KNOT:
https://mikrotik.com/product/knot#fndtn-specifications
3.2 Standard Kit Contents
Included parts are shown in the bottom the KNOT’s specification page (under “Included
parts”):
https://mikrotik.com/product/knot
24V 1.2A power adapter
K-47 wall mount set
USB OTG cable
DIN rail mount set
KNOT manual (hardware setup) can be found at:
https://help.mikrotik.com/docs/pages/viewpage.action?pageId=41680915
You will require RJ-45 cables to setup LAN and/or WAN connection. RJ-45 cables are not
provided.
The device can be powered with micro-USB(5-5 V), DC-jack (12-57 V) or PoE (active af/at and
passive – 12-57 V). Micro-USB and DC jack are provided with the package.