Quick Guide

Reset button
The reset button has three functions:
• Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration.
• Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD
look for Netinstall servers.
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Operating System Support
The device supports RouterOS software with the version number at or above what is indicated in the RouterOS menu
/system resource. Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document. Document #49062 Modified on: 26.APR.2019