User Manual

1.
2.
3.
4.
5.
1.
1.
2.
3.
4.
5.
6.
Configuration for RouterOS
To set the configuration for LR please connect to the device and log in with your web browser, Winbox or mobile application. Two easy steps to follow:
First step:
Once logged in, Quick Set will be selected, please switch to WebFig on the right side of the screen. If the configuration is done through mobile
application then click on the gear symbol on the right side of the screen to open up an advanced menu.
On the left side menu please find and select the ion "Lora".
On the newly opened window select the ers tab.
Click + to add a w server configuration.
A new window will appear and you will have to enter:
Name: (Server name)
Address: (Server address)
Up port: (Usually it's 1700)
Down port: (Usually it's 1700)
Click OK to save.
Second step:
Select the Device tab on the previous window.
Double-click or tap on the line to configure.
Choose the previously entered networkon the drop-down menu.
Click on the button Enable to enable the gateway.
Click OK to save.
The configuration is done.
Specifications
The module can be installed on the miniPCIe to USB adapter and used in any of our devices with a B slot and installed Lora package.
To use the le in other devices packet forwarder from Semtech is required. https://github.com/Lora-net/packet_forwarder
Operating system support
The module supports RouterOS software version v6. Other operating systems have not been tested.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is
IP0.
Mounting and configuration of this device should be done by a qualified person.