User Manual

Optionally you can use the thermal pad by placing it under the card, the thermal pad is not included in the package;
Install the module to the miniPCIe slot and secure it with previously removed screws. Tightening torque 0,3 Nm.
Connecting to the antenna
Attach antenna cable to the connector on the module:
If your device does not have internal antennas, it is possible to connect to the external antennas by adding cable connectors, product code –
ACSMAUFL. https://mikrotik.com/product/acsmaufl
Please connect and disconnect the antenna, when the device is turned off!