User Manual

Table Of Contents
R11e-LR8
R11e-LR8
R11e-LR8 - LR mPCIe Gateway module. It can be integrated into a RouterBOARD product with mPCIe slot. Requires LR package installation to configure
in RouterOS.
Specifications
Low power-consuming with mini PCIe interface, for long-distance data, transmit:
Interface – Mini-PCIe;
Temperature Operating -40 / +70;
Supports Class A and C;
Frequency - 863-870MHz (EU);
RF Output power - 862-870MHz (EU) @ 14dBm;
Receive max sensitivity - 137 dB @ SF12, Depends on the antenna used;
Maximum power consumption 2 W.
Installing the module in your device
R11e-LR8 for professional use. Each of the cards comes in ESD protective packaging. When handling electrical equipment please observe the following
safety precautions:
Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical discharge (ESD) damage;
After unpacking please place the card on the anti-static mat;
When installing make sure there are no objects that can damage or touch the PCB plate;
The card can be installed in your desired device using the factory provided screw holes in a PCB plate;
Pictures added for illustration purposes, the device configuration, and the placement of the miniPCIe card may vary.
Locate miniPCIe slot on your device;
Unscrew two factory attached screws;
Optionally you can use the thermal pad by placing it under the card, the thermal pad is not included in the package;
Install the module to the miniPCIe slot and secure it with previously removed screws. Tightening torque 0,3 Nm.

Summary of content (5 pages)