User Manual

Table Of Contents
1.
2.
3.
4.
5.
1.
Connecting to the antenna
Attach antenna cable to the connector on the module:
When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.
Configuration for RouterOS
To set the configuration for LR please connect to the device and log in with your web browser, Winbox, or mobile application. Two easy steps to follow:
First step:
Once logged in, Quick Set will be selected, please switch to WebFig on the right side of the screen. If the configuration is done through a mobile
application then click on the gear symbol on the right side of the screen to open up an advanced menu.
On the left side menu please find and select the section "Lora".
On the newly opened window select the Servers tab.
Click + to add a new server configuration.
A new window will appear and you will have to enter:
Name: (Server name)
Address: (Server address)
Up port: (Usually it's 1700)
Down port: (Usually it's 1700)
Click OK to save.
Second step:
If your device does not have internal antennas, it is possible to connect to the external antennas by adding cable connectors, product code –
ACSMAUFL. https://mikrotik.com/product/acsmaufl
Please connect and disconnect the antenna, when the device is turned off!
We recommend usingTOF-2400-8V-4 Omni antenna