Brochure

QSFP 40G accessories

This optical module oers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth

and aggregate bandwidth of 40 Gbps.

It can provide a connection over 100 m on OM3 Multimode Fiber (MMF) and 150 m on OM4 MMF.

The module has built-in digital diagnostic functions, including optical power monitoring, and will perform

well in environments up to 70° C.

It has been designed to meet the harshest conditions, including temperature, humidity and EMI

interference, so we deﬁnitely recommend this as a reliable solution for all your 40 Gbps QSFP+ devices.

We recommend to use these QSFP 40G accessories with our CRS326-24S+2Q+RM, but they are also

compatible with other manufacturer’s QSFP 40G switches and routers.

Q+85MP01D – the 40 Gbps 850nm optical QSFP+ module

Transmit Min Type Max Unit

Output opt. power -7.6 - +2.4 dBm

Receive

Avg Rx sensitivity -9.9 - +2.4 dBm

Max received pwr +2.5 - - dBm

LOS de-assert - - -12 dBm

LOS assert -30 - - dBm

Speciﬁcations

PAGE 1
QSFP 40G accessories QSFP 40G accessories We recommend to use these QSFP 40G accessories with our CRS326-24S+2Q+RM, but they are also compatible with other manufacturer’s QSFP 40G switches and routers. Q+85MP01D – the 40 Gbps 850nm optical QSFP+ module This optical module offers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth and aggregate bandwidth of 40 Gbps. It can provide a connection over 100 m on OM3 Multimode Fiber (MMF) and 150 m on OM4 MMF.
PAGE 2
QSFP 40G accessories Q+DA0001 – a 40 Gbps direct attach QSFP+ cable Connect two CRS326-24S+2Q+RM switches without a hassle – this cable has integrated QSFP+ modules, plug it in and enjoy the speed! The cable is 1 meter long and is fairly flexible – your devices don’t have to be on top of each other. Specifications Product code Q+DA0001 Connector type QSFP+ to QSFP+ Minimum bend radius 35 mm Cable length 1m Temperature 0°C ..
PAGE 3
QSFP 40G accessories Q+BC0003-S+ – a 40 Gbps QSFP+ breakout cable to 4x10G SFP+ This cable will let you enjoy all the benefits of our new switch with the 40 Gbps ports without upgrading your whole network setup. You can connect the CRS326-24S+2Q+RM to 4 other 10G SFP+ devices in a breeze, since the QSFP+ and SFP+ modules are integrated. The cable is 3 meters long, which should be enough for most setups.