Quick Guide

Expansion slots and ports
• One Gigabit Ethernet port, supporting 24 V PoE output by default settings is set to OFF.
Buttons and Jumpers
PWR connection button (sync)
• Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE PRO device. A
blinking amber LED light indicates that it is in search mode. You have to also do the same on the other
PWR device, so they can synchronize. Press button again to cancel the search.
• Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE PRO device
from an existing PWR network.
• Hold 10 – 15 seconds. Resets all PWR related settings.
• In case of trouble to pair device, hold the SYNC button for 5 - 8 seconds to generate new network key and
then re-attempt to pair it in PWR-LINE PRO network again holding SYNC button for 0.5 – 3 seconds.
LED lights and PoE switch
1. Blue LED indicates device power ON state.
2. Amber LED indicates that the device is paired, blinking amber indicated that the device is in search mode.
Can be activated with sync button. Please refer to the PWR connection button (sync) section.
3. Green LED indicates Ethernet port connectivity.
4. Red LED indicates that PoE is active.
5. PoE switch by default settings is set to OFF. A standard ballpoint pen can be used to switch positions. The
Red light will indicate that PoE is active.
Accessories
Package includes the following accessories that come with the device:
• K-62 fastening set.
• EU/US power cord, D03+QT1 H03VV-F 0x0.75 mm2, 30 cm RoHS, White color.
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/pl7510gi
See mikrotik.com/products for the latest version of this document. Document #49004 Modified on: 14.OCT.2019